Never sand your bottom paint again! Our carefully designed paint removal system will create a smooth surface for new paint while maintaining the gel coat underneath. Our recycled glass mixture allows the paint to be stripped off cleanly and leave your boat ready for painting and a new season on the water! Our blasting mixture and process supports glass recycling, causes no damage to the gel coat underneath, and leaves less mess in the surrounding area.
The crushed glass in the mixture is used by top marine industry specialists for a variety of factors. The need to reuse and recycle materials is important for all industries, and the marine world is no different there. Glass particles that are too small to be used in traditional recycling needs would otherwise be moved to waste facilities. The glass is ideal because it will break apart further as it strikes the surface in its slurry, preventing damage while still removing paint effectively.
The gel coat is often damaged by other removal processes. This means that after the exhausting traditional process of sanding and scraping, the gel coat would also have to be repaired. Not so with our recycled glass slurry method! The glass breaks apart and scrapes off surface contaminates and paint, while the gel coat will remain fully intact and ready for your next step.
The no-mess process is created using dustless blasters attached to high-volume vacuum cleaners to ensure a clean area and a clean boat! Even though dustless paint removal is not likely to leave any marks outside of the blaster area, we will always carefully tape and tent the surrounding parts of your boat to ensure the cleanest edges. Our experienced technician and careful process keeps the damaging bottom paint from aerosolizing in the environment or spreading to cover other objects in the area. This means that we can perform bottom paint removal at nearly any place where your boat is being stored.
Our process creates a 99% dust-free removal area. Want your bottom paint removal performed in your driveway? Next to another boat? No problem! We can perform bottom paint removal at our shop in North East, Maryland, or we can come out to any of the surrounding areas, including Elkton and surrounding area.
Once we finish the bottom paint removal, all you need to do is have your barrier coat and paint ready! There is no additional sanding required. You can expect your boat to be clean and ready for its new bottom paint! You have one fun day of painting rather than several days of painstaking paint removal ahead of you.
If you would like us to follow your boat’s bottom paint removal with its brand-new finish, we can do that too! Ask us about any color or finish. We can match any factory paint color or perform the special finish you desire for your boat to get back on the water.
Call today for a free quote!
The “Slurry Blaster” uses a mixture of water, air, and crushed glass to provide 99% dustless job!